What is your Facial Index?

[Siginulfo]

Simple question, simple answer

[Scrapple]

94.28 leptoprosopic (long-/narrow-faced)

[HungAryan]

No idea

[Artek]

95.6, leptoprosopic.

[Siginulfo]

For people don't know the Formula, here it is:
Total Facial Height for 100, all divided for Byzigomatic Diameter.
Here are images for taking measurements:
http://dienekes.awardspace.com/calc/rac/

[gold_fenix]

93.8

[Scrapple]

This is how I did it.

From SNPA

morphological face height * 100 divided by maximum facial breadth

MORPHOLOGICAL FACE HEIGHT (n-gn) (total face height)

Meausured with sliding calipers. Place the fixed tip of the calipers at the subject's gnathion, slide the moveable end superiorly until it contacts nasion.



MAXIMUM FACIAL BREADTH (zy-zy) (bizygomatic diameter)

Measured with sliding or spreading calipers. By palpation locate the most lateral point of the zygomatic arch with the tips of index fingers and place the caliper tips on the arches with enough pressure to feel the bone; move the calipers back and forth, up and down until scale shows maximum reading.



According to Martin:

F.I. - 79.9 = hypereuryprosopic (very short-/broad-faced)
F.I. 80.0 - 89.9 = euryprosopic (short-/broad-faced)
F.I. 90.0 - 94.9 = leptoprosopic (long-/narrow-faced)
F.I. 95.0 - = hyperleptoprosopic (very long-/narrow-faced)

A F.I. of 84.0 - 87.9 is often called mesoprosopic (moderate in facial form).

[Oreka Bailoak]

94

[Queen B]

If I am doing it correct then, 104
I have very slim and long head (I have a big head in general, so I guess Its a normal result.)

[Mordid]

Euryprosopic