AreYouWhite G25 Calculator (AYW)

Quote:

---

Originally Posted by Upsilander

What's your ancestry?



.

---

Assyrian from Eastern Anatolia.

Quote:

---

Originally Posted by chinshen

Distance to: Chinshen_scaled
0.84398454 Oceanian_Papuan
0.65750461 Amerindian_Native
0.64840300 East_Asian
0.78441759 African_Nigerian

---

Quote:

---

Originally Posted by chinshen

Assyrian from Eastern Anatolia.

---

There must be something wrong with your datas (target or source). I have a few in flashball collection and mine that have very high distances but not that much and all combined. It should as well come out in increasing order like this :

https://i.postimg.cc/3NTR4c5W/upsivah1.png

Quote:

---

Originally Posted by Upsilander

There must be something wrong with your datas (target or source). I have a few in flashball collection and mine that have very high distances but not that much and all combined. It should as well come out in increasing order like this :

https://i.postimg.cc/3NTR4c5W/upsivah1.png

---

I don't know, it could be. This is what I got
Attachment 132912

Quote:

---

Originally Posted by Upsilander

There must be something wrong with your datas (target or source). I have a few in flashball collection and mine that have very high distances but not that much and all combined. It should as well come out in increasing order like this :

https://i.postimg.cc/3NTR4c5W/upsivah1.png

---

Here is a second try.
Attachment 132913

Quote:

---

Originally Posted by chinshen

I don't know, it could be. This is what I got
Attachment 132912

---

Because you have ADC on in "multi" mode. Just run the TAB "distance"

And you also mixed up target and source datas. Your coords should go in "target" and the dataset in "source"

Quote:

---

Originally Posted by Upsilander

There must be something wrong with your datas (target or source). I have a few in flashball collection and mine that have very high distances but not that much and all combined. It should as well come out in increasing order like this :

https://i.postimg.cc/3NTR4c5W/upsivah1.png

---

Please tell me what I did wrong so I can correct it.

Quote:

---

Originally Posted by Upsilander

Because you have ADC on in "multi" mode. Just run the TAB "distance"

And you also mixed up target and source datas. Your coords should go in "target" and the dataset in "source"

---

Thank you for correcting me.
Is this better:

Distance to: Chinshen_scaled
0.62904331 East_Asian
0.63787317 Amerindian_Native
0.76099684 African_Nigerian
0.81878527 Oceanian_Papuan

Attachment 132914

Quote:

---

Originally Posted by chinshen

Thank you for correcting me.
Is this better:
Attachment 132914

---

Yes seems good now but i can't read it. Simply copy paste the values in your post.

Quote:

---

Originally Posted by Upsilander

Yes seems good now but i can't read it. Simply copy paste the values in your post.

---

Distance to: Chinshen_scaled
0.62904331 East_Asian
0.63787317 Amerindian_Native
0.76099684 African_Nigerian
0.81878527 Oceanian_Papuan

Quote:

---

Originally Posted by chinshen

Distance to: Chinshen_scaled
0.62904331 East_Asian
0.63787317 Amerindian_Native
0.76099684 African_Nigerian
0.81878527 Oceanian_Papuan

---

All good now. Seems like a pass :thumb001:

I ran some Assyrian samples and about half passed, some that did not were very close to. It was surprising. I would like to hear more about you region or if it's an isolated community if you want in pm. Very interesting that you got so high distances, in particular to East Asian and Amerindian!