What is your Cephalic index?

[Roy]

66

Woah, the lowest here by far. Australoid-like level.

[Kivan]

77 (Mesocephalic).

[brennus dux gallorum]

76, Dolichocephal med pride

Not sure which subtype exactly, maybe atlanto-pontid combination

Think this would be a good thread to have some dialogue.

If I measured correctly I am 88 so that puts me as a Brachycephalic.

Sit really, thats hyper-brachycephalic, brachycephalic itself is rare in portugal, let alone hyper

[Komintasavalta]

Average of multiple measurements performed with a caliper:

Length: 213
Breadth: 157
CI: 73.7

Raw measurements:

Length: 214.5 215.0 213.7 215.3 (average 214.625 - 2 ≈ 213)
Breadth: 159.2 159.0 158.5 158.5 (average 158.8 - 2 ≈ 157)

In order to approximate skeletal measurements, I performed the measurements so that I didn't press the caliper very hard, but I subtracted 2 mm from the measurements returned by the caliper, because the thickness of the scalp is supposed to be about 1-1.5 mm. When at first I tried to press the caliper hard until it hurt, the caliper returned to a more relaxed position before I was able to see the reading.

According to the definition used by HPT, dolichocephalic (excluding hyperdolichocephalic) is 71<=CI<76, so I'm around the middle of the dolichocephalic range. I'm disappointed because I would've rather wanted to be mesocephalic.

Sample	Length	Breadth	CI
Me	213	157	73.7
Finnish men (excluding Northeastern Finns) in Mark and Heapost 2014	193	155	80
Finnish-speaking men from Finland Proper in Arho 1934	194.2	153.5	79.1

[Komintasavalta]

Facial dimensions are not really related to skull dimensions. So nothing surprising there. Fex Dinarics are broadskulled with longish faces.

Apparently I'm the reverse, because according to the definitions used by HPT, I'm dolichocephalic but euryprosopic and platyrrhine (a true Black Finn):

213;cranium length
157;cranium width
145;bizygomatic width
117;face height
41;nose width
48;nose height
73.7;cephalic index (dolichocephalic: 71-76)
80.7;facial index (euryprosopic: 79-83)
85.4;nasal index (platyrrhine: 85-100)

I measured nose height from the nasion to the subnasale (https://www.theapricity.com/snpa/glo...#nose%20height). I measured face height from the nasion to the gnathion (https://www.theapricity.com/snpa/glo...0FACE%20HEIGHT). (Edit: actually menton and not gnathion, when gnathion is defined as the middle point between the menton and the pogonion.)

[Steppe Timelord]

Apparently I'm the reverse, because according to the definitions used by HPT, I'm dolichocephalic but euryprosopic and platyrrhine (a true Black Finn):

213;cranium length
157;cranium width
145;bizygomatic width
117;face height
41;nose width
48;nose height
73.7;cephalic index (dolichocephalic: 71-76)
80.7;facial index (euryprosopic: 79-83)
85.4;nasal index (platyrrhine: 85-100)

I measured nose height from the nasion to the subnasale (https://www.theapricity.com/snpa/glo...#nose%20height). I measured face height from the nasion to the gnathion (https://www.theapricity.com/snpa/glo...0FACE%20HEIGHT).

Those metrics look very skewed and frauded.

Someone 6'5-6 range would never have just a 47 mm nose length without looking weird. Or 117 mm face height, otherwise you would look extremely small headed from frontal view. 117mm face height is literally alpine tier, only 5'7-6' alpine men have it. It's obvious there was something modified/rigged at those measurements. The nose width looks off too. Headshape is typical for nordids btw, I really think you are some nordid who wants to be a mongolized borreby. It's like one of those stories, where, skinny men want to be big and robust. But you don't know what robust really is, so you confuse/mistook mongoloid qualities for robust. It would be interesting to see your face. Do it when you have time.

[Fraisod]

Width: 16.5 cm
Length: 20 cm
Circumference: 59 cm
Ceph. index: 82.5 (brachy)

[Ülev]

Average of multiple measurements performed with a caliper:

Length: 213
Breadth: 157
CI: 73.7

Raw measurements:

Length: 214.5 215.0 213.7 215.3 (average 214.625 - 2 ≈ 213)
Breadth: 159.2 159.0 158.5 158.5 (average 158.8 - 2 ≈ 157)

In order to approximate skeletal measurements, I performed the measurements so that I didn't press the caliper very hard, but I subtracted 2 mm from the measurements returned by the caliper, because the thickness of the scalp is supposed to be about 1-1.5 mm. When at first I tried to press the caliper hard until it hurt, the caliper returned to a more relaxed position before I was able to see the reading.

According to the definition used by HPT, dolichocephalic (excluding hyperdolichocephalic) is 71<=CI<76, so I'm around the middle of the dolichocephalic range. I'm disappointed because I would've rather wanted to be mesocephalic.

Sample	Length	Breadth	CI
Me	213	157	73.7
Finnish men (excluding Northeastern Finns) in Mark and Heapost 2014	193	155	80
Finnish-speaking men from Finland Proper in Arho 1934	194.2	153.5	79.1

welcome to the dolicho community, zero Uralic in you?
(CI 71,4 here)

[Linebacker]

I am brachycephalic even tho my head doesn't actually show it, If I remeber my CI was 82-83.

I have to write to the lore master Ubermensch on facebook about my actual measurements, he used to keep logs on all Apricity members.

[Fraisod]

Apparently I'm the reverse, because according to the definitions used by HPT, I'm dolichocephalic but euryprosopic and platyrrhine (a true Black Finn):

213;cranium length
157;cranium width
145;bizygomatic width
117;face height
41;nose width
48;nose height
73.7;cephalic index (dolichocephalic: 71-76)
80.7;facial index (euryprosopic: 79-83)
85.4;nasal index (platyrrhine: 85-100)

I measured nose height from the nasion to the subnasale (https://www.theapricity.com/snpa/glo...#nose%20height). I measured face height from the nasion to the gnathion (https://www.theapricity.com/snpa/glo...0FACE%20HEIGHT).

You know someone is serious when they invest in a pair of calipers.