Mega QAPDM Models thread

[Grace O'Malley]

This is the best for me so far. I'm going by the percentage result on the left. Could someone let me know? I'm just trying to understand what is a good result in these models.

[Grace O'Malley]

High Yamnaya. How feasible is this model?

[Fistora]

High Yamnaya. How feasible is this model?

I think it's a very good model, considering the low errors.

[Gannicus]

High Yamnaya. How feasible is this model?

Looks fine to me. P-value is way above 0.05.

You could experiment with different WHGs in the references and see if your own WHG admix increases.

[Fistora]

Here are some of my recent results





there is still something to improve here

[Gannicus]

VK202 from Scotland is apparently a local Pictish individual with no Scandinavian ancestry. So, I did some models of myself with him.

Here is how he is labeled in the dataset:


Here you all will see a bit of a difference between G25 and qpAdm.



Distance to: Gannicus_MergedFile_officialDavidski_scaled
0.02821931 Scotland_Viking:VK202__AD_950__Cov_57.86%
0.18920718 Lebanon_EjJaouze_Phoenician.SG

Target: Gannicus_MergedFile_officialDavidski_scaled
Distance: 0.0228% / 0.02275620
91.8 Scotland_Viking
8.2 Lebanon_EjJaouze_Phoenician.SG



Distance to: Gannicus_MergedFile_officialDavidski_scaled
0.02821931 Scotland_Viking:VK202__AD_950__Cov_57.86%
0.16307509 Italy_Pompeii_Roman:f1R__AD_79__Cov_33.78%

Target: Gannicus_MergedFile_officialDavidski_scaled
Distance: 0.0240% / 0.02397695
91.6 Scotland_Viking
8.4 Italy_Pompeii_Roman



Distance to: Gannicus_MergedFile_officialDavidski_scaled
0.02821931 Scotland_Viking:VK202__AD_950__Cov_57.86%
0.11782058 Italy_Basilicata_Venosa


Target: Gannicus_MergedFile_officialDavidski_scaled
Distance: 0.0218% / 0.02181276
86.6 Scotland_Viking
13.4 Italy_Basilicata_Venosa





Distance to: Gannicus_MergedFile_officialDavidski_scaled
0.02821931 Scotland_Viking:VK202__AD_950__Cov_57.86%
0.25568171 Syria_TellQarassa_Umayyad


Target: Gannicus_MergedFile_officialDavidski_scaled
Distance: 0.0232% / 0.02324438
94.1 Scotland_Viking
5.9 Syria_TellQarassa_Umayyad



Distance to: Gannicus_MergedFile_officialDavidski_scaled
0.02821931 Scotland_Viking:VK202__AD_950__Cov_57.86%
0.22606617 Egyptian_LateKingdomPeriod_JK2134_JK2911_avg


Target: Gannicus_MergedFile_officialDavidski_scaled
Distance: 0.0228% / 0.02284658
93.1 Scotland_Viking
6.9 Egyptian_LateKingdomPeriod_JK2134_JK2911_avg


And then I modeled VK202's Steppe+ANF/EEF+WHG admixture:



With the exact same references, I modeled my own Steppe+EEF+WHG admixture:

[Gannicus]

Pre Yamnaya model:

[Grace O'Malley]

I'm having great difficult getting good models for Iron Age and Medieval periods. All my models have a large statistical error.

[Gannicus]

I'm having great difficult getting good models for Iron Age and Medieval periods. All my models have a large statistical error.

You can try these ^

With those references I did this model:









You can also try this reference list too. It was with this list that I did this model:



If you try either of those two lists, you may need to remove or substitute a related population one at a time.

[Grace O'Malley]

You can try these ^

With those references I did this model:









You can also try this reference list too. It was with this list that I did this model:



If you try either of those two lists, you may need to remove or substitute a related population one at a time.

First model didn't work but 2nd one did.





I no doubt have real ancestry from Kilteasheen as my father has long term ancestry from close to where these genomes were buried and is R1b-M222. I just can't find the right model for them.

On MyHeritage Ancient Origins I'm closest to Kilteasheen KIL001.

My No 1 two way fit on Illustrative dna is below.



My No 2 is with the Pict and No 3 with Kilteasheen.